About this deal
Sheet C26 shows detail dimensions for pillar-type terminals, where the end of the screw bears on a wire directly or through a pressure plate.
It is generally possible to use a connector with a higher rated temperature with a lower rated appliance inlet, but the keying feature of the inlet prevents use of a connector with a lower temperature rating. The standards define the mechanical, electrical and thermal requirements and safety goals of power couplers. Similar connector to C5/C6, but with a key ridge instead of an earthing conductor, withdrawn from standard.Hi, yesterday I did not know what a NEMA5-15RX or a IP44-110/16p were but with the excellent help of Olly and Lou of Leads Direct I now own these items. By designing an IEC 60320 power inlet into a product, the manufacturer can attach a country-specific cord set (e.
g. a country-specific plug on one end with an IEC 60320 connector on the other end) just prior to shipment.
FYI it connects a controller/programmer (RJ12) for an astronomical telescope to a digital camera (2. Kettle/jug plug” is also informally used to refer to regular temperature-rated C13 and C14 connectors.
Note that the manufacturer's page only mentions the 16 A rating when used with 14 AWG wire; the UL certification allows 20 A when used with 12 AWG wire.Cord set: "assembly consisting of one cable or cord fitted with one non-rewirable plug and one non-rewirable connector, intended for the connection of an electrical appliance or equipment to the electrical supply".