3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

Depending on the 3D printed material, the effect may vary, which is why it is highly recommended to test the 3DLac Stick with certain materials ( ABS, PP, Nylon or advanced polymers) before 3D printing the final part.

Leveraging 3DLAC’s extensive decade-long expertise in developing anti-warping solutions, 3DNYLON gains valuable insights and experience. is a high quality anti warping adhesive that you spray to your heated print bed to help your prints stick. A product capable of fixing what was needed in each part of the printing process and which meets our conditions was essential. Proper adhesion of the extruded material to the 3D printing base is a crucial factor in successful 3D prints as it helps prevent layer misplacement, warping and deformations. When our filament users asked what we recommend for bed adhesion, we would always suggest this product.If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch. Once the printed piece gets cold, it can be taken off smoothly and without any damage to your 3D printed project.

ensures that the first layer of each 3D print adheres securely to the build plate surface, making sure the print starts well and stays in position. We started printing right back in 2014 and have tried every trick in the book when it comes to bed adhesion. The function of 3DLAC is to provide a firm and durable adhesion of the filament to the base, avoiding the movement of the piece on the first layers and eliminating warping (lifting of the sides).A light 3DLAC mist over the surface is enough to completely hold the first layer of plastic to the base. At that moment, the Kapton tape was the only product to fix the first layer to the 3D printers’ surface but its application was complex and required in some cases, especially for larger surfaces, an extreme amount of patience to apply! All users who prefer use lacquer and not Kapton Tape, can be achieved with a sprayed or vaporized light on the glass bed base that the first plastic layer is fixed completely to this base bed. After printing a single piece re-spraying 3DLac right in the area of the piece it is finished printing, the rest of the surface with spray every 3-4 prints is enough.

Finance is only available to permanent UK residents aged 18+, subject to status, terms and conditions apply. is the perfect substitute for Kapton tape and other types of fixers due to cost-saving and its easy application.We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. One where our 2D thoughts are turned into 3D realities and where you have full control of your creative experiments, with a little help from an online expert community that loves to share what we do. This feature ensures even distribution, reduces excess adhesive, and ultimately enhances print quality, making it an ideal choice for 3D printing users.

Box Limited is authorised and regulated by the Financial Conduct Authority (registration number 726076) as a credit intermediary and not a lender, offering credit products provided by PayPal Credit. Plus spray adhesive in a practical pump spray bottle based on thermoplastic copolymers for the 3D printing FFF or FDM technology.We’re dedicated to enhancing your nylon 3D printing experience with a comprehensive nylon starter pack. It should always be applied on a clean and dry surface by gently pressing the applicator against the printing surface for a few seconds until the product starts flowing. Over a clean and dry surface, place the container upside down and gently press the applicator against the hot bed for a few seconds and allow a small portion of the product to flow. Especially for 3D printers feature 'Heated Bed' or "heated bed" although it is also valid for 3D printers with cold base.