Tested to Type X durability which means the QWR Fire Collars can be installed in conditions exposed to weathering. Quelfire QWR CE Marked Fire Collars are expected to last the lifetime of the building. Tested to Type X durability which means the QWR Fire Collars can be installed in conditions exposed to weathering. QWR CE Marked Fire Collars are expected to last the lifetime of the building. The QuelCast Manifold has been designed and developed to create a 70 mm recess in the floor slab either on the top or on the bottom of the floor slab to allow for applications where there is limited ceiling space and so the plastic pipe can be installed closer to the ceiling with the pipe connection recessed in the slab. For example: Pyroplex® Intumescent Pipe Collars have been specifically designed to prevent the passage of fire and hot gases through: When the intumescent collar has been securely fitted into place any residual gaps between the intumescent collar and the substrate can be filled using Pyroplex® Intumescent Acrylic Sealant.

The Quelfire QWR CE Marked Fire Collars consist of a continuous pressed stainless steel flexible shell containing high performance graphite based intumescent material which reacts under the influence of heat to exert pressure on the pipe as it softens to form a carbonaceous char which provides an effective insulation plug thus preventing smoke and fire passing through to the adjoining compartment. The QWR CE Marked Fire Collar has built in fixing lugs which are used to secure it to the structure. The QWR CE Marked Fire Collars consist of a continuous pressed stainless steel flexible shell containing high performance graphite based intumescent material which reacts under the influence of heat to exert pressure on the pipe as it softens to form a carbonaceous char which provides an effective insulation plug thus preventing smoke and fire passing through to the adjoining compartment. With decades of experience in the supply of pipe collars, our ISO accreditation, and 24-hour production, Talon has become the market leading provider of piping products and accessories in the UK, as well as to customers around the world. Ensure substrate around 110mm pipe is flat and free from obstructions – if necessary make good by using Pyroplex® Intumescent Acrylic Sealant. All of our products are manufactured in-house and by a team of experts, allowing us to provide consistent quality control and efficient service for every single customer.The QWR CE Marked Fire Collar has built in fixing lugs which are used to secure it to the structure, and can be used in conjunction with QF2 Fire Protection Compound.

When installing a QuelCast Manifold Recess Former to the underside of the slab the process is: cut the spigot off the manifold, position the QuelCast on the manifold within the indentations, secure together using self tapping screws through each corner of the QuelCast body and then install as a whole unit using the centre line indicators on the Manifold Recess Former as a guide instead of the QuelCast. The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intendeduse and no guarantee is given or impliedas the conditions of actual use are beyond our control. If in doubt the customer should consult the designerof the project or the local building control. We pride ourselves on our approach to building long-term relationships with customers to become a valued supplier and accommodating specific customer requirements where possible as well as furthering our company-wide commitment to reducing our carbon footprint.Secure intumescent 110mm pipe collar by drilling holes in structure by using fixing lugs as template. To fix use M8 x 65mm sleeve anchors or 50mm [minimum] expanding bolts.